Answer
Aug 12, 2025 - 07:39 AM
To get the tension rod to stay securely in your KLOM 7 Pin Tubular Lock Pick (7.8mm), here are some tips that usually help:
-
Insert Fully: Make sure the tension rod is inserted fully into its slot or hole in the handle before applying tension. It often clicks or fits snugly when fully seated.
-
Use the Locking Mechanism: Many tubular picks have a small set xxxx , clip, or locking collar to hold the tension rod in place. Check if yours has a tiny xxxx you can tighten with a small screwdriver or Allen key to lock it.
-
Adjust the Rod Position: Sometimes the rod needs to be positioned at a certain angle or depth to catch securely. Try rotating or slightly pushing/pulling it while applying gentle pressure.
-
Clean and Lubricate: If it’s loose or slipping, a tiny bit of graphite powder or dry lubricant can help the rod grip better without sticking.
-
Check for Damage: Inspect the tension rod and handle for any wear, bent parts, or damage that might prevent it from holding firmly.
