Answer
Dec 12, 2022 - 06:50 AM
Please try the following procedure.However, some vehicles will require an Automotive Locksmith with special equipment. S 3. Perform these steps within 40 seconds. A. Using the power lock switch on the driver's door of your Toyota 4Runner, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 Cycle = 1 lock and 1 unlock). B. Close, then open drivers door. 4. Perform these steps within 40 seconds. A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 Cycle = 1 lock and 1 unlock). B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Do NOT Start) then back to OFF. D. Remove the key from the ignition. 5. Within 3 seconds the power door locks on your Toyota 4Runner should cycle automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. 6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote key fob simultaneously for 1 second. B. Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle once indicating successful programming. If the door locks do not cycle, or cycle twice. Repeat steps A and B in step 6 as your remote has not been accepted. C. Repeat steps A and B in step 6 for each new remote key fob. 7. Close drivers door.